








Endeavor Trooper Pro Snowboard
ENTRP-W26-154
Designed for Exploring.
The Trooper Pro is a directional powder snowboard made to ride short. The Trooper is built for all conditions. Ridden short, the generous waist fits your boots and bindings without toe or heel drag. Taper and hover camber sink the tail and lift the nose when it gets deep, and the tapered pin tail keeps it nimble everywhere else.
Medium flex. There's no plastic topsheet: the top layer is Phonon pre-tensioned fibreglass, with 11 carbon stringers and tri-axial fibreglass over a poplar and paulownia core, a sintered ISO Speed 7500 base and 95A SmoothRide urethane sidewalls. The 156 weighs 2.4 kg (5.4 lb). 4x2 inserts.
CHOOSE YOUR SIZE
- Powder: Size up for maximum float.
- All Mountain: Run your normal size to bomb everything.
- Freestyle: Size down for tight turns and hit runs.
Sizes 152, 154, 156 and 158. Waists run from 265 to 270 mm, and rider weight runs from 65 to 90 kg (140 to 200 lb) across the range.
The Phonon manufacturing process leaves small variations in the finish, which give each board its own character.










Flex
Medium
Camber profile
Hover Camber
Camber / Early Rise
Terrain
Freestyle / Powder / All Mountain
Shape
Directional with taper
Pre-Tensioned Fibreglass
Phonon pre-tensioned fibreglass is laminated under tension, so it stores energy as the board flexes and releases it as you come out of a turn or pop off a lip. No plastic topsheet.
Ride It Short
Ridden short, the generous waist fits your boots and bindings. The tapered pin tail keeps it nimble and easy to turn.
Pre-Tensioned
A Phonon pre-tensioned fibreglass top layer and 11 carbon stringers store energy as the board flexes and give it back out of turns and off jumps.
Hover Camber
Camber from the tail contact point to just above your front inserts, then early rise to lift the nose out of the snow.
SmoothRide Sidewalls
95A urethane sidewalls damp vibration on hard snow.
4x2 Mounting System
Adjust your stance width in 2 cm increments. Compatible with a range of binding brands.
Graphic Design
Artwork by O.Two – Static Mist (@staticmist).

The 156 weighs in at 5.4 lbs (2.4 kg). There's no plastic topsheet: the top layer is Phonon pre-tensioned fibreglass, laminated under tension so it stores energy as the board flexes and gives it back as you come out of a turn. Eleven carbon stringers and triaxial fibreglass sit over a poplar and paulownia core. Underneath is a sintered ISO Speed 7500 base, with 95A SmoothRide urethane sidewalls to damp vibration on hard snow.
Shape and construction
| Shape | Directional with taper |
|---|---|
| Terrain | Freestyle / Powder / All Mountain |
| Flex | Medium |
| Camber | Hover Camber |
| Core | Poplar + Paulownia |
| Base | Sintered ISO Speed 7500 |
| Fibreglass | Phonon Pre-Tension + Tri-Axial |
| Sidewall | 95A SmoothRide Urethane Sidewall |
| Technology | Phonon Pre-Tensioned Fibreglass + 11 Carbon Stringers |
Technical specifications
The size you pick above is highlighted. Scroll sideways to compare the rest of the run.
Construction
| Shape | Directional with taper |
|---|---|
| Terrain | Freestyle / Powder / All Mountain |
| Flex | Medium |
| Camber | Hover Camber |
| Core | Poplar + Paulownia |
| Base | Sintered ISO Speed 7500 |
| Fibreglass | Phonon Pre-Tension + Tri-Axial |
| Sidewall | 95A SmoothRide Urethane Sidewall |
| Technology | Phonon Pre-Tensioned Fibreglass + 11 Carbon Stringers |
Sizes
| Size | 152 | 154 | 156 | 158 |
|---|---|---|---|---|
| Contact length (mm) |
770 | 790 | 810 | 815 |
| Effective edge (mm) |
1134 | 1150 | 1172 | 1195 |
| Nose width (mm) |
318 | 322 | 324 | 326 |
| Waist width (mm) |
265 | 268 | 269 | 270 |
| Tail width (mm) |
296 | 300 | 302 | 304 |
| Sidecut radius (mm) |
7500 | 7550 | 7600 | 7650 |
| Stance range (in) |
18–24 | 19–25 | 19–25 | 19–25 |
| Rider weight (lb) |
140–190 | 150–200 | 150–200 | 150–200 |
| Rider weight (kg) |
65–85 | 68–90 | 68–90 | 68–90 |
| Max binding size | Medium | Large | Large | Large |
Contact length is the measurement from tip to tail of the edge that touches the snow when the snowboard is weighted, determined by the camber profile.
How our boards are built: bases, cores, fibreglass and edges →
Size guide
Pick a size by rider weight, then check your boot fits the waist.
Boot sizes are a guide, worked out from each size's waist width. If you are between sizes or have wide feet, go for the wider board. Binding size is the largest we recommend.
Tim Russell
You can feel the volume shifted shape working in your favour.
Video review Reviewed by Board Archive
Frequently asked questions
Start with the Size guide on this page: it lists the rider weight range and boot sizes for every length. For park and rails, size down for easier spins. For jumps or an everyday board, ride your normal size. To charge the whole mountain, size up. If you have big feet or sit between sizes, go for the wide.
Freestyle and park: Pioneer, Ranger, Rover and Sentinel. All-mountain: B.O.D., B.O.D. Pro and Live. Freeride: Apollo, Free Ranger Pro, Maverick, Scout and Trooper Pro. All-mountain and powder: Archetype Pro. Every board page shows its flex, camber, terrain and shape just under the price.
One year from the date of purchase, against manufacturing defects. If you bought your board from an Endeavor dealer, take it back to them to start a claim. If you bought it from us online, contact us. The full steps are on our warranty page.
The Archetype Pro, B.O.D. Pro, Free Ranger Pro and Trooper Pro use Phonon pre-tensioned fibreglass with carbon stringers over a poplar and paulownia core, an ISO Speed 7500 base and 95A urethane sidewalls.
Free shipping on orders over $70 in North America. US prices include all duties and taxes, so there is nothing extra to pay at the door.
Full-priced items can be returned within 14 business days, unused and in the original packaging with your receipt. Sale items are final sale. Email info@endeavordesigninc.com to start a return.
