


Endeavor Trooper Pro Snowboard
ENTRP-PRO-152
Designed for Riding Short.
The Trooper Pro is a volume-shifted board: ride it shorter and wider than your usual board. The waist runs 265 to 270 mm across the whole size run, so a short board still has the surface area to float, and the short length turns quick in trees and tight spots. Taper and hover camber sink the tail and keep the nose up. It's a directional freeride and powder snowboard.
Snowboard Mag put it in their Hot 100 for carving: "Coming in with razor-sharp edges, the Trooper Pro felt immediately fast and locked-in."
Medium flex, with a Phonon pre-tensioned fibreglass top layer that has pre-cured carbon stringers woven in, over a poplar and paulownia core. 22 mm of taper.
CHOOSE YOUR SIZE
- Size Down: Ride it about 4 cm shorter than your normal board. The 152 is built for the same rider weight as a 156 Scout (140 to 190 lb).
- Powder: Pick the top of your weight range for maximum float.
- Tight Trees: Pick the bottom of your weight range for quick turns.
Sizes 152, 154, 156 and 158, for riders from 65 to 90 kg (140 to 200 lb).





Endeavor Trooper Pro Snowboard
Flex
Medium
Camber profile
Hover Camber
Camber / Early Rise
Terrain
Freeride
Shape
Directional
Pre-Tensioned Fibreglass
Phonon pre-tensioned fibreglass, with carbon stringers woven in, is laminated under tension, so it stores energy as the board flexes and releases it as you come out of a turn or pop off a lip. No plastic topsheet, no wet-laid top glass.
Volume Shifted
Shorter and wider than a standard board. It floats like a longer board and turns like a short one.
Pre-Tensioned
Phonon pre-tensioned fibreglass with carbon stringers woven in for pop, torsion and less weight.
Effortless Float
Taper and hover camber sink the tail and pop the nose.
SmoothRide Sidewalls
95A urethane sidewalls damp vibration on hard snow.
4x2 Mounting System
Adjust your stance width in 2 cm increments. Compatible with a range of binding brands.
Hot 100 · Carving · Read the review

The top layer is Phonon pre-tensioned fibreglass with pre-cured carbon stringers woven in, laminated under tension so it stores energy as the board flexes and gives it back as you come out of a turn. It sits over a poplar and paulownia core. Underneath is an ISO Speed 7500 base, with 95A SmoothRide urethane sidewalls to damp vibration on hard snow.
Shape and construction
| Shape | Directional |
|---|---|
| Terrain | Freeride |
| Flex | Medium |
| Camber | Hover Camber |
| Core | Poplar + Paulownia |
| Base | ISO Speed 7500 |
| Fibreglass | Phonon Pre-Tension |
| Sidewall | 95A SmoothRide Urethane Sidewall |
| Technology | Phonon Pre-Tensioned Fibreglass with Carbon Stringers woven in |
Technical specifications
The size you pick above is highlighted. Scroll sideways to compare the rest of the run.
Construction
| Shape | Directional |
|---|---|
| Terrain | Freeride |
| Flex | Medium |
| Camber | Hover Camber |
| Core | Poplar + Paulownia |
| Base | ISO Speed 7500 |
| Fibreglass | Phonon Pre-Tension |
| Sidewall | 95A SmoothRide Urethane Sidewall |
| Technology | Phonon Pre-Tensioned Fibreglass with Carbon Stringers woven in |
Sizes
| Size | 152 | 154 | 156 | 158 |
|---|---|---|---|---|
| Contact length (mm) |
770 | 790 | 810 | 815 |
| Effective edge (mm) |
1134 | 1150 | 1172 | 1195 |
| Waist width (mm) |
265 | 268 | 269 | 270 |
| Sidecut radius (mm) |
7500 | 7550 | 7600 | 7650 |
| Taper (mm) |
22 | 22 | 22 | 22 |
| Stance range (in) |
18–24 | 19–25 | 19–25 | 19–25 |
| Rider weight (lb) |
140–190 | 150–200 | 150–200 | 150–200 |
| Rider weight (kg) |
65–85 | 68–90 | 68–90 | 68–90 |
| Max binding size | MEDIUM | LARGE | LARGE | LARGE |
Effective edge is the straight span between the contact points, where the nose and tail start to rise. Contact length is the part of that edge on the snow when the board sits flat: the same as effective edge on traditional camber, shorter on multi, 3D and hover camber. Binding size is the maximum recommended.
How our boards are built: bases, cores, fibreglass and edges →
Size guide
Pick a size by rider weight, then check your boot fits the waist.
Boot sizes are a guide, worked out from each size's waist width. If you are between sizes or have wide feet, go for the wider board. Binding size is the largest we recommend.
Snowboard Mag · Hot 100 Carving
Coming in with razor-sharp edges, the Trooper Pro felt immediately fast and locked-in.
Dave, verified buyer
Very good carving with solid edge hold. Nimble and easy to turn in the bumps.
Frequently asked questions
Start with the Size guide on this page: it lists the rider weight range and boot sizes for every length. For park and rails, size down for easier spins. For jumps or an everyday board, ride your normal size. To charge the whole mountain, size up. If you have big feet or sit between sizes, go for the wide.
Freestyle and park: Pioneer, Ranger, Rover and Sentinel. All-mountain: B.O.D., B.O.D. Pro and Live. Freeride: Apollo, Free Ranger Pro, Maverick, Scout and Trooper Pro. All-mountain and powder: Archetype Pro. Every board page shows its flex, camber, terrain and shape just under the price.
One year from the date of purchase, against manufacturing defects. If you bought your board from an Endeavor dealer, take it back to them to start a claim. If you bought it from us online, contact us. The full steps are on our warranty page.
The Archetype Pro, B.O.D. Pro, Free Ranger Pro and Trooper Pro use Phonon pre-tensioned fibreglass with carbon stringers woven in, over a poplar and paulownia core, an ISO Speed 7500 base and 95A urethane sidewalls.
Free shipping on orders over $70 in North America. US prices include all duties and taxes, so there is nothing extra to pay at the door.
Full-priced items can be returned within 14 business days, unused and in the original packaging with your receipt. Sale items are final sale. Email info@endeavordesigninc.com to start a return.
